DCP TECHNOLOGY
"The Most Advanced Technology For Wet-Milling Applications"

Recirculation Perl Mills^®

The high-efficiency Perl Mills patented for DRAIS,

DCP MegaFlow^®

MegaVantis^®,

each feature two grinding chambers connected in series with internal grinding media recirculation. Thus, hydraulic packing of media is prevented even at highest throughputs (recirculation grinding)

DCP MegaFlow^®-C
for the ultimate in fine grinding with the narrowest particle size distribution

• Enhanced dynamic media separator provides for better product / media separation even for highly viscous materials such as paste printing inks
• Enhanced super cooled Mill System for heat sensitive products
  
• Double-cylindrical peg Perl Mill®. Turbulent motion of micro grinding media by rotor and stator pegs. Centrifugal separation of grinding media. With and without additional rotor cooling. Drive power 5.5 – 250 kW.

DCP MegaVantis^®

Innovative multiple-zone Perl Mill® for highest dispersing quality by the combination of three load mechanisms in series: effective pre-dispersing in the eddy current inducing gap, impact grinding by turbulence pegs, shear load in the cylindrical gap

DRAIS DCP MILLS
Line With "Special Polymer Compound or Ceramics" for Nanoparticles Production In High-Tech Products

DRAIS DCP TECHNOLOGY sets new standards in wet grinding of high tech products down to nanometer range with NO METAL CONTAMINATION.

DCP TECHNOLOGY offers high energy density milling, internal true media recirculation and the most efficient grinding media / product separation by centrifugal force. High flow recirculation followed by shorter residence times provides for high energy density milling even for mills coated with "Special Polymer Compound or Ceramics" as there is minimum temperature build up in the mill. Therefore, simple cooling on the premix tank for mixing the product prior to milling is mostly sufficient for processing temperature sensitive products. Low processing temperatures can easily be maintained in the DCP MILLS.

In General;

The DRAIS DCP MegaFlow is a rotor and stator pegged mill, which utilizes high energy density milling combined with high cooling surface for maximum particle size reduction efficiency. The internal media recirculation prevents media flotation thus allowing much higher flow rates than can be achieved in conventional horizontal mills.


The DRAIS DCP MegaVantis combines the impact milling of the MegaFlow and the shear dispersion. The unit is perfect for temperature sensitive products as the inner stator can be made from silicon carbide for better heat transfer.

OTHER TECHNOLOGIES FROM DRAISWERKE FOR WET-MILLING APPLICATIONS

DRAIS PERL MILL PMC-TEX

In the PMC-TEX series, the grinding beads are separated by means of ceramic screen cartridges of modular design. The separating slot width can be adjusted to the particular grinding media size used, by changing the spacer discs. The smallest possible width is 100 micron.

PM - STS - DDA (DRAIS Continuous Direct Dispersion Plant)

Contact for more information...